12/07/2011

Classifications of Roofs

Getting roofing works, we must first understand what are the roof. Thus, the classification of roofs. The main purpose of the roof is to protect the building from the top of the atmospheric effects (rain, snow, fluctuations outside air temperature, solar radiation, wind and other external factors). Penetration into the building water and cold, as well as overheating of the sun roof lead to their destruction. Which naturally affects on its economic feasibility in mind the frequent repairs and alterations.

Naturally, during the roofing work has bolshshie differences in the construction of different types of roofs. The shape of the roof is divided into pitched and flat. Form the roof is determined by the architecture of the building and its configuration in the plan. On the roof structure and attic distinguish bescherdachnye. Depending on the temperature regime of the upper building envelope bescherdachnye (combined), the roof is divided into unventilated and ventilated.

By appointment distinguish operated (solarium, sports facilities, cafes, etc.) and unexploited roof. Pitched roofs are the attic and bescherdachnye. Attic roofs are made with cold or warm attic. Bescherdachnye roof can be cold (over unheated buildings) and warm (over heated buildings). Bescherdachnye roof suit both residential and public and industrial buildings in the industrial and agricultural purposes. In commercial buildings, often on the covers of satisfied svetoaeratsionnye lights. Shed roof slope is based on exterior walls at different levels. Gable roof usually consists of two planes, based on the walls, located on one level. Triangular parts of face walls between pitched call with forceps. Hip roof has four triangular slope, the tops of which converge at one point. Hipped (hipped) roof is formed from the union of two trapezoidal ramps and two triangular frontal ramps, known as the hips.
Dec 7, 2011 12:37:33 AM

Verify your Comment

Previewing your Comment

Posted by:  | 

This is only a preview. Your comment has not yet been posted.

Working...
Your comment could not be posted. Error type:
Your comment has been posted. Post another comment

The letters and numbers you entered did not match the image. Please try again.

As a final step before posting your comment, enter the letters and numbers you see in the image below. This prevents automated programs from posting comments.

Having trouble reading this image? View an alternate.

Working...

Leave a comment

(URLs automatically linked.)

Your Information

Name and email address are required. Email address will not be displayed with the comment.

NEXT POST
Consequences Low Build a warm house from a brick to date with soaring energy prices does not make sense. Wood retains heat well, it has low thermal conductivity and are obtained from it at home warm, but the tree - a tree and a shelf life he has so much less than our competitors have in the near future to repair, alter, so this version I also threw away because I wanted to build a house with the expectation of grandchildren and :-) great-grandchildren. Next was aerated concrete blocks. This version I dropped for the following reason - water resistance. If gazoblok put into the water, it is by typing the water like a sponge, drowns while on the phone manufacturer assured me otherwise, to exaggeration of this lack of competitors. Still living house that looks like a sponge I do not want, bearing in mind what the consequences might arise. After that I went to the factory polistirolblokov, where he was surprised that there is almost no finished goods and work. Faced with the owner, without any concealment that told me their production rose and explained why. Demand for polystyrene blocks began to fall sharply in identifying many of them environmental drawbacks: the use of polystyrene minute deals huge damage to the ecology of our planet, breaking under normal conditions it selects a pair of phenol and other poisons. High-quality eco-friendly polystyrene only do overseas, and...
PREVIOUS POST
The Window Sashes Residential, public, industrial, agricultural and other buildings and structures should be in good natural light. This is achieved by constructing windows, skylights, glass roofs, etc. Prolonged exposure to sunlight can lead to overheating of the interior in the summer, that can not be justified sanitary requirements. In the cold season because of the multitude of skylights there are large losses of heat, rooms supercooled, which also leads to violation of sanitary regime in the premises. Window openings are arranged to achieve maximum illumination with minimum heat losses and is well ventilated. Building regulations govern the room lighting jobs. Depending on the purpose of buildings and climate skylights can be a single, double or triple glass. As well as windows, glass blocks and profile glass. Glazing window frames must be done qualitatively, since the substandard performance of these works wooden windows freeze, rot. A metal binding in addition to freezing corrode. Lighting of residential and public buildings, mainly through windows. Therefore, the requirements for their installation should be increased. Boxes can be wooden, derevoalyuminievymi, aluminum, metal, concrete and plastic of different shapes and sizes. Window frames are hollow and open, as well as one-, two-and mnogostvorchatye with vents without them. The upper part is called the transom. Transoms are deaf and opening up. In the sticks of bindings for inserting the glass selected quarters, called folds, varying depth and width. Folds are simple and complex. If...